Torque FPV
Replacement kit with Ti screws, aluminum standoffs, aluminum nuts, and camera mount
Replacement kit with SS screws, aluminum standoffs, aluminum nuts, and camera mount
FrSky Receiver Antenna 15 cm - IPEX Connector
1 replacement IPEX antenna. Fits the latest FrSky receivers.
Specifications
- Length: 15cm
- Connector Height: 1mm
- Connector Width: 2.1mm
A replacement FrSky Receiver Antenna 15 cm - IPEX Connector
35V 1000uF LOW ESR Capacitor
Includes
1x 35V 1000uF LOW ESR Capacitor
Clean up that video and protect your electronics!
35V 330uF LOW ESR Capacitor
Includes
1x 35V 330uF LOW ESR Capacitor
Clean up that video and protect your electronics!
Titanium Hardware kit (Pro 5) (Pro 5 TiKit)
Replacement kit with Ti screws, aluminum standoffs, aluminum nuts, and camera mount.
Replacement kit with Ti screws, aluminum standoffs, aluminum nuts, and camera mount
Pro 5 Mid Plate
OEM mid plate replacement is 1.5mm thickness. At this moment we have never had one break. If the description shows zero a midplate can be made to order and will be shipped within two business days.
Replacement Mid plate.
SMA Extension Cable - 100MM Cable length (120MM Overall) Female RP-SMA to Male SMA
Includes:
SMA Extension Cable
100MM Cable length (120MM Overall)
Female RP-SMA to Male SMA
QTY 1
SMA Extension Cable
100MM Cable length (120MM Overall)
Female RP-SMA to Male SMA
QTY 1
Female RP-SMA to uf.l - 150MM - 90 degree
Included:
90 degree female RP-SMA to uf.l
150MM
QTY 1
90 degree female RP-SMA to uf.l
150MM
QTY 1
Female RP-SMA to uf.l Cable 110mm Overall
Female RP-SMA to uf.l Cable
110mm Overall
QTY 1
110mm Overall
QTY 1
Stainless Steel Hardware Kit (Pro 5) (Pro 5 SSKit)
Replacement kit with SS screws, standoffs, aluminum nuts, and camera mount.
Replacement kit with SS screws, aluminum standoffs, aluminum nuts, and camera mount
Pro 5 Bottom Plate
Bottom plate is 2mm and we have yet to break one, because of this quantity will always be low. Since we make our frame in house, we can have a replacement shipped within two business days even if the inventory count shows zero.
Replacement bottom plate
Pro 5 Top Plate (Pro 5 top plate)
Top plate replacement. Identical to the original top plate 1.5mm thickness. Even if there is no quantity in the description the plate will be made to order and shipped within two business days.
Replacement top plate for the Pro 5.
Adjustable step down voltage regulator
Input voltage: 4.75V-23V
Output voltage: 1.0V-17V
Output Current: lowering the value of 3A, long 1.8A
Conversion efficiency: 96% (maximum)
Switching Frequency: 340KHz
Output ripple: 30mV (no-load)
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Working temperature: -40 ℃ to +85 ℃
External dimensions: 17 * 11 * 3.8 (L * W * H) (mm)
Features: Use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient.
Output voltage: 1.0V-17V
Output Current: lowering the value of 3A, long 1.8A
Conversion efficiency: 96% (maximum)
Switching Frequency: 340KHz
Output ripple: 30mV (no-load)
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Working temperature: -40 ℃ to +85 ℃
External dimensions: 17 * 11 * 3.8 (L * W * H) (mm)
Features: Use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient.
Pro 5 Lite Mid plate (Pro 5 Lite Mid plate)
Replacement mid plate for Pro 5 Lite
Mid plate for Pro 5 Lite. Only fits Pro 5 Lite.
TorqueFPV 12v Power Supply 1000watts
Carbon Fiber Wrapped 1000Watt Power Supply with Protective Cover and digital power readout.
This is a 12 volt, 75 amp, 900 watt power(1000watts on 240volts) supply for RC chargers like iCharger, ISDT, Thunder Power, Orion and Hitec
These are done in small batches, looks may vary, we use several different types of carbon vinyl sheets.
A power cord is included
Unlimited Pooowaaaa!!
Torque Pro 5 Camera Mount (Pro 5 CamMount)
Torque Pro 5 Micro Camera Mount - RED TPU Printed - 1 Set
Our custom designed and TPU printed Micro Camera Mount
5mm Pro 5 Arms
Upgraded Pro 5 Arms in 5mm Carbon for those heavy motors!
Qty 2 included.
Qty 2 included.
Two 5mm Pro 5 Arms
Evo bottom Plate (Pro 5 Evo)
Replacement for evo bottom plate, not for team evo.
Replacement Evo bottom plate